It’s quite common to deal with blocked drains in homes. As a matter of fact, it’s an issue that plumbers are usually called for. Blockages are problems waiting to happen beneath your sink. You must know the signs of a sink that’s about to be clogged so you can prevent the problem from happening.
Blockages may not seem to be a problem at first, until it bursts your pipes. When that happens, you’re bound to do some costly repairs in your home. It’s best that you know what to do in case your drain gets blocked for whatever reason.
Things to Do When Your Drain Gets Clogged
If your drain gets clogged, then you must call a plumber right away. You’ll benefit from the services of an expert who is well-experienced in handling blocked drains London. With their help, you can get things fixed right away. But until they arrive, there are some things that you can try. These are:
- Try the boilingwatertechnique.
This must be the oldest way of clearing the clogs in the drain. Simply boil water in a kettle and pour it directly into the drain. Be careful not to pour water on the sink as it may damage porcelain and ceramic bowls. Hot water loosens and dissolves blockages. Just be sure that your pipes aren’t made with PVC as they may get damaged as well.
- Try thebaking soda and vinegartechnique.
The baking soda and vinegar technique is a clever DIY drain clear that actually work. Simply pour baking soda first into the drain before following it up with vinegar. Be sure to cover the drain after adding vinegar or some of the debris may go back up to the sink. You may have to repeat the process as needed.
- Use a causticcleaner
Caustic chemicals are drain cleaners that are available in supermarkets and hardware store. You may use these solutions as they’re effective in dissolving hair, grease, food, and other debris. But don’t do this often. If the problem isn’t resolved when you applied it, call a plumber instead. Overly using these chemicals can harm the pipe and the environment as well.
- Try a plunger.
There are hand plungers that you can use to clear out drains. There’s one that’s especially made for drains and there’s another or toilets. They are used in the same way. Make a strong seal and use the up and down pressure to clear the pipe of any blockage.
- Use a drain snake.
There are drain snakes available at a nominal price that is used to help clear drains of blockages. They’re rather easy to use as well. But if you hire professionals, you’ll notice that their snake drains have a small camera attached at its end. This is how the see what’s inside the pipes.
- Try hydro-jetting.
Hydro-jetting is a special device that creates a powerful stream of water through the pipes. The high pressure will push the blockage and destroy it. If you want to try this route, you have to hire a plumber to do it for you.